Skip to content
SNOWSPORTS LAB

Reel 8

Why wax your board… then scrape it all off?

The explanation

Snowboard bases are made of a plastic (polyethylene, often called P-Tex). Hot wax soaks into its surface. That absorbed wax is what makes the base glide and keeps it from drying out.

The wax left on top is a different story. Wax is softer and stickier than the base, and a thick layer fills the fine grooves (the structure) ground into the base. Those grooves channel away the thin film of water that forms under the board; clog them and the board sticks.

So you scrape off everything that wasn't absorbed, then brush the structure open. Let the wax cool first: scraping it warm pulls wax back out of the base.

Sources
  1. Scrape off unabsorbed wax, brush the structure clean

    Intro to glide waxing

    Boulder Nordic Sport (ski shop guide)

    Tuning guide from a ski shop, not a study.

  2. Base structure and water film under the board

    Toko wax manual

    Toko (wax manufacturer)

    Manufacturer manual.

Sources checked November 2026. Spotted a mistake? Tell us on Instagram.